Manage jobs on the Océ TCS400 177
Change the default drying time
Introduction
You can change the drying time with a percentage of the default drying time.
For example, if you set the default drying time for Premium coated paper,
under the conditions used in the table above, to 200%, the drying time will be
0'40".
How to change the default drying time
1
Open the Océ Settings Editor application.
2 Go to the setting KO - Printer - Media settings - Drying time.
3 Select the required media type.
4 Define the required percentage.
To Next Page
Loading...
