178 Océ TCS400 User manual
Continuous printing
Fallback mode
Introduction
If printheads are failing, the Océ TCS400 can continue to print with the same
output quality. To use this option, the setting KO - Printer - Fallback mode
in the Océ Settings Editor must be enabled.
Use of the fallback mode
If the fallback mode is enabled, and printheads fail, the printer continues to
print with the same quality at half the speed.
If the printer is in the grayscale mode and a color printhead fails, the printer
continues to print grayscales at full speed. If a black printhead fails, the printer
continues to print at half the speed.
If the fallback mode is not enabled and you continue to print, the output quality
decreases. The print speed does not decrease. (see ‘When to do’ on page 186)
To Next Page
Loading...
