Manage jobs on the Océ TCS400 159
How to adjust the pressure platen to the thickness of your original
1
Open the scanner cover to expose the pressure platen.
2 Use one hand to press down on the platen.
3 Put two fingers in the recesses in the front of the slider. Adjust the slider to the
thickness of the original.
[45] Put t wo fingers in the recesses in the front of the slider
[45] Put two fingers in the recesses in the front of the slider
Use the measurement scale on top of the slider to adjust the slider to the
thickness of the original.
[46] The measurement scale on to p of the slide r
[46] The measurement scale on top of the slider
To Next Page
Loading...
