196 Océ TCS400 User manual
3 Press the key for 'Used' or 'New'.
Select 'Used' if you inserted a cassette that was used before. The end-of-life
counter is not reset to zero.
Select 'New' if you inserted a cassette that was not used before. The end-of-life
counter is reset to zero.
Note: Make sure you select the correct option. Never select 'New' for a used
cassette. This can cause serious damage your printer.
4 Close the door to the maintenance cassette.
The screen displays the message 'Carriage moving to home position...'
To Next Page
Loading...
