Oce TCS400 - Page 200

200 Océ TCS400 User manual
4 Clean the glass plate.
Clean the glass plate with a lint-free cloth and a mild, streak-free, glass cleaner.
Use a separate clean, dry lint-free cloth to dry the glass plate completely.
5 Clean the white platen.
The white background platen is on the back of the pressure platen you removed
in step 3. Clean the white surface and the transport rollers with a lint-free cloth
and a mild, streak-free, glass cleaner. First clean the platen's white area and
then the transport rollers. Use a separate clean, dry lint-free cloth to thoroughly
dry the platen and the rollers.
6 Replace the pressure platen.
Use the two handles on top of the pressure platen to replace the pressure platen
upright on the glass plate.
Make sure the springs are fit over the pins.
[62] Make sure the springs are fit over the pins
[62] Make sure the springs are fit over the pins