Oce TCS400 - Page 232

232 Océ TCS400 User manual
Introduction to the Océ Power Logic® controller: Océ System
Control Panel
Description of the Océ System Control Panel
The Océ System Control Panel application provides you with the following
information about the status of the system.
■ Status of the printer
■ Descriptions of the different types and sizes of available media on the
system
■ The ink level for each color
■ Status of the scanner
■ Status of the controller
■ The amount of set memory in use.
You can access the Océ System Control Panel locally on the controller if you
have a keyboard, mouse and monitor with your Océ Power Logic
®
controller.
You must use Océ Remote Logic
®
to connect to the Océ System Control Panel
if you do not have a keyboard, mouse and monitor with your Océ Power
Logic
®
controller.
See 'Océ Power Logic® controller: Océ Settings Editor' for information about
how to start the application locally on the controller.(see ‘Start the Océ Power
Logic® controller applications’ on page 220).
See 'Océ Power Logic® controller: Océ Remote Logic®' for information about
how to start the application from a remote workstation. (see ‘Start the
applications with Océ Remote Logic®’ on page 256).
User operations in the Océ System Control Panel
The Océ System Control Panel allows you to do the following:
■ Make a demo print. See Make a demo print
■ Print your system configuration (see ‘Save, load, and print the settings’ on
page 229)
■ Clear the system memory (see ‘Miscellaneous errors’ on page 208)
■ Shut down the system (see ‘Turn the Océ Power Logic® controller and the
printer off’ on page 43).