Oce TCS400 - Page 234

234 Océ TCS400 User manual
The menu bar
[37] The items of the menu bar
[37] The items of the menu bar
Menu Items
'File'
■ Click 'Log on' to select the user mode. Then enter the
password.
■ Click 'Log off' to leave the user mode.
■ Click 'Connect to' and select a different controller (only for
remote users).
■ Click 'Close' to leave the Océ System Control panel.
'Edit' Click 'Options' to define the following:
■ The 'Host name'.
■ The 'Default system'.
■ The 'Automatic logon'. Use 'Automatic logon' to
automatically start up in the defined user mode.
■ Select the two screen languages.
'View'
■ Select one of the display languages for the application.
■ Display the items for the status control. Click an item to
view the status. The items correspond with the buttons of
the toolbar.
'System'
■ Click 'Print settings' to print a report of the configuration
settings.
■ Click 'Demo print' to make a demo print.
■ Click 'Clear system' to remove all the jobs from the system.
■ Click 'Shut down' to shut down the system.
'Help'
■ Click 'Contents' to access the topics of the on-line help.
■ Click 'About' for general information about the Océ System
Control Panel.