Oce TCS400 - Page 244

244 Océ TCS400 User manual
The toolbar
[41] The toolbar buttons
[41] The toolbar buttons
The status bar
The status bar at the bottom of the Océ Queue Manager displays the following:
■ The system status (connected or disconnected).
■ The system name ('localhost' if you work on the Océ Power Logic
®
controller).
■ The job status (for example 'Printing').
■ The user mode ('Key operator', 'Repro operator', 'System administrator',
'Service operator' or 'Anonymous').
The window for the print queue
The print queue window in the left-hand pane contains two sections.
■ The top section above the separation line shows the job that is printed.
■ The bottom section under the separation line shows the jobs that wait to be
printed. The window displays the jobs in the order in which the jobs are
received.
Button Function
'Hold' Place a job on hold in the print queue .
'Resume' Continue a job that was placed on hold.
'Move to top' Move a job to the top of the print queue, to give the job
priority.
'Delete' Delete a job from the print queue.
'Properties' View the properties of a selected job.
'Print' Print a job from the print queue.