Oce TCS400 - Page 67

Make copy jobs on the Océ TCS400 67
Define the original size
1
Select the 'Original' card with the upper softkeys.
2 Select the 'Original size method' setting with the softkey for 'Size'.
3 When you select 'Standard width' as the 'Original size method', use the softkey
for 'Standard' to select the original standard size for the defined paper range.
4 If you select 'Custom' as the 'Original size method', use the softkey for 'Custom'
to select 'Custom width' or 'Custom length'.
5 Use the arrow keys to define the 'Custom length' and the 'Custom width'.
If you select 'Full length' as the 'Custom length', the complete length of the
original is scanned.