Olympus Magna-Mike 8600 - Figure 5-9 Example of a Locked Function Message in the Help Bar; Figure 5-10 the PASSWORD SETUP Screen

DMTA-10026-01EN, Rev. D, January 2015
Chapter 5 100
Figure 5-9 Example of a locked function message in the help bar
To set the password
1. In the measurement screen, press [SET UP], and then select PASSWORD SET.
2. In the PASSWORD SETUP screen (Figure 5-10 on page 100), using up to eight
alphanumeric characters, enter your password in the INSTRUMENT
PASSWORD field.
Figure 5-10 The PASSWORD SETUP screen
Locked function
message