DMTA-10026-01EN, Rev. D, January 2015
Initial Setup
51
3. Initial Setup
The following sections describe basic system configurations.
3.1 Setting the User Interface Language and Other System Options
You can configure the Magna-Mike 8600 to present the user interface in the following
languages: English, French, Spanish, German, Japanese, Chinese, Russian, Swedish,
Italian, Portuguese, Norwegian, Hungarian, Polish, Dutch, and Czech. You can also
set the character delimiting the radix of a number.
The Magna-Mike 8600 includes a beep tone generator to confirm when a key is
pressed and to notify you of an alarm condition. You can set the beeper on or off.
To save battery while you do not use the instrument, you can enable the inactive time
function so that the instrument automatically turns off when no key has been pressed
and no measurement has been made within about six minutes.
To change the user interface language and other system options
1. In the measurement screen, press [SET UP], and then highlight SYSTEM.
2. In the SYSTEM submenu, select the desired parameter: BEEPER, INACTIVE
TIME, LANGUAGE, RADIX, PROBE BUTTON, FOOT SWITCH, or
UPGRADE.
For the software UPGRADE mode, refer to“Activating the Software Upgrade Mode”
on page 106.
To Next Page
Loading...
