Olympus Magna-Mike 8600 - Power Requirements; Figure 1-6 the RS-232 and VGA out Connectors

DMTA-10026-01EN, Rev. D, January 2015
Chapter 1 24
Figure 1-6 The RS-232 and VGA Out connectors
1.4 Power Requirements
The Magna-Mike 8600 is designed to operate using three power supply methods:
• Directly from the Magna-Mike 8600 charger/adaptor
• Optional internal lithium-ion battery
• Optional internal alkaline battery holder
Press to turn on the Magna-Mike 8600 (see Figure 1-7 on page 25). Pressing this
key once causes an initial beep, followed by the instrument startup screen and a
second beep approximately five seconds later.
VGA Out connector
RS-232 connector