DMTA-10026-01EN, Rev. D, January 2015
Instrument Overview
37
1.6.2 Connectors
The Magna-Mike 8600 instrument provides numerous connections. The following
sections describe these connections.
1.6.2.1 Probe and Foot Switch Connectors
The Magna-Mike 8600 instrument is supplied with a 12-pin probe connector. A 2-pin
foot switch connector can be used with an optional foot switch (Olympus P/N: 85FSW
[U8780127]).
The PROBE and FOOT SWITCH connectors are located at the top of the instrument,
on the left-hand side. The two connectors are easily accessible from the front of the
instrument (see Figure 1-18 on page 38).
MEAS (measurement) — Completes
the current operation and returns to
the measurement screen. This key
has the same function as the MEAS
key located on the top left-hand
corner of the keypad.
FILE — Provides access to the file
menus (Open, Review, Create, Cal
Recall, Copy, Delete, Send,
Edit/Rename, and Reports).
ID# (identification number) —
Accesses several functions related to
the ID numbers for the thickness
measurement location.
On/Off — Turns the instrument
power on or off.
Table 3 Keypad functions (continued)
English
Inter-
national
Chinese Japanese Function
To Next Page
Loading...
