DMTA-10026-01EN, Rev. D, January 2015
Accessories and Replacement Parts
161
Table 26 Probes, probe cables and wear tips
Description Part number
Standard probe 86PR-1 [U8470020]
Right-angle probe with handle 86PR-2 [U8470028]
Low-profile articulating probe 86PR-3 [Q7800004]
Probe cable,1.5 meter (5 feet) 86PC [U8801410]
Coiled probe cable, 3.04 meter (10 feet) 86PCC [U8780323]
Standard probe cable, 1.83 m (6 ft) 86PC-6 (Q7800016)
Replaceable wear tip 86PR1-WC [U8780324]
Extended wear tip 86PR1-EWC [U8780344]
Chisel wear tip 86PR1-CWC [U8780326]
Probe stand for 86PR-1 86PRS1 [U8771043]
Probe stand for 86PR-2 86PRS2 [U8771044]
Probe stand for 86PR-3 86PRS3 [Q7800006]
Table 27 Targets balls, disks, and wires
Description Part number
Target balls, 1.59 mm (1/16 in.), 200 in package 80TB1 [U8771030]
Target balls, 3.18 mm (1/8 in.), 300 in package 80TB2 [U8771031]
Target balls, 4.76 mm (3/16 in.), 75 in package 80TB3 [U8771032]
Target balls, 6.35 mm (1/4 in.), 40 in package 80TB4 [U8771033]
Target disk, Flat Edge, 0.79 mm (1/32 in.) thick, 12.70 mm (1/2 in.)
diameter, 1 in package
80TD1 [U8771034]
Target disk, V-Edge, 6.35 mm (0.25 in.) diameter 80TD2 [U8771035]
Magnetic target balls, 4.76 mm (3/16 in.), gold color, 30 in package 86TBM3 [U8771039]
Magnetic target balls, 6.35 mm (1/4 in.), gold color, 20 in package 86TBM4 [U8771040]
Wire target, 1.14 mm (0.045 in.) diameter, 254 mm (10 in.) long, 10
in package
86TW1 [U8771041]
Wire target, 0.66 mm (0.026 in.) diameter, 254 mm (10 in.) long, 20
in package
86TW2 [U8779858]
To Next Page
Loading...
