Olympus Magna-Mike 8600 - Figure 1-8 Connecting the Charger;Adaptor; Figure 1-9 Connecting the DC Power Plug

DMTA-10026-01EN, Rev. D, January 2015
Chapter 1 26
Figure 1-8 Connecting the charger/adaptor
2. Lift the rubber seal that covers the DC connector on top of the Magna-Mike 8600
instrument.
3. Connect the DC output power cable from the charger/adaptor to the DC power
connector on top of the Magna-Mike 8600 (see Figure 1-9 on page 26).
Figure 1-9 Connecting the DC power plug
To power outlet
DC power connector
EP-MCA-X
charger/adaptor
AC power cord
DC power cable from the
charger/adaptor
DC power connector
(rubber seal not shown)