DMTA-10026-01EN, Rev. D, January 2015
Instrument Overview
43
Figure 1-22 Instrument stand
1.6.3.3 O-Ring Gasket and Membrane Seals
The Magna-Mike 8600 contains seals that are used to protect the instrument internal
hardware from the environment. These include:
• Battery compartment cover seal
• I/O door seal
• Membrane vent
These seals must be properly maintained to assure environmental durability.
Instrument seals are evaluated and replaced as needed during the instrument annual
calibration. This should be performed at an authorized Olympus service center.
1.6.3.4 Display Protection
The Magna-Mike 8600 includes a clear-plastic sheet protecting the instrument display
window. Olympus strongly recommend to leave this protection sheet in place.
Replacements are available in packages of ten sheets (Olympus P/N: 600-DP
[U8780297]).
To Next Page
Loading...
