DMTA-10026-01EN, Rev. D, January 2015
Instrument Overview
39
Figure 1-19 The RS-232 and VGA Out connectors
The VGA Out connector allows the user to connect the instrument to a standard
analog computer monitor.
Do not expose the instrument to harsh and wet environments while the RS-232 or the
VGA Out connectors are not protected by their rubber covers. To prevent connector
corrosion and damage to the instrument, keep the rubber protective covers on the
connectors when no cable is connected.
1.6.2.3 microSD and USB Port
On the right-hand side of the Magna-Mike 8600, a door covers the microSD slot and
the USB port (see Figure 1-20 on page 40). The I/O door closes against an integral
membrane seal to keep liquids away from the unsealed connectors behind the door.
VGA Out connector
RS-232 connector
To Next Page
Loading...
