DMTA-10026-01EN, Rev. D, January 2015
Instrument Overview
25
Figure 1-7 Location of the Magna-Mike 8600 power key and indicator light
1.4.1 Charger/Adaptor
The Magna-Mike 8600 charger/adaptor is provided with every instrument. The
charger/adaptor is the primary method for powering the Magna-Mike 8600 with or
without a battery installed. It is also used to charge the optional lithium-ion
rechargeable battery when installed in the instrument. A charger/adaptor indicator
light on the front panel of the unit displays the current status of the charger/adaptor.
To connect the charger/adaptor
1. Connect the AC power cord to the charger/adaptor and to an appropriate power
outlet (see Figure 1-8 on page 26).
To avoid the risk of injury or equipment damage, use only the AC power cord
supplied with the Magna-Mike 8600. Do not use this AC power cord with other
products.
Power key
Charger/adaptor
indicator light
To Next Page
Loading...
