Olympus Magna-Mike 8600 - 7 Using the Datalogger; Datalogger Functions; Figure 7-1 the Active File Name Appearing in the Header Bar

DMTA-10026-01EN, Rev. D, January 2015
Using the Datalogger 111
7. Using the Datalogger
This chapter describes how to use the Magna-Mike 8600 internal datalogger to
organize your data.
7.1 Datalogger Functions
The Magna-Mike 8600 datalogger is a file-based system where one file is opened at a
time. The active file stores a measurement at a thickness measurement ID# location.
Each time you press [SAVE], the displayed value is saved to the active file at the
current ID#. The ID# is automatically incremented for the next measurement. The
name of the active file and the current ID# location appears in the header bar above
the measurement screen.
Figure 7-1 The active file name appearing in the header bar
Name of the active file