DMTA-10026-01EN, Rev. D, January 2015
Chapter 2
50
4. If you need to move the position of the cursor in the value text box, highlight
either or on the virtual keyboard, and then press [ENTER].
The cursor moves by one character position.
5. When you need to delete a character:
a) Move the cursor to the character that you wish to delete.
b) On the virtual keyboard, highlight DELETE, and then press [ENTER].
6. When you need to insert a character:
a) Move the cursor to the character in front of which you wish to insert a
character.
b) On the virtual keyboard, highlight INSERT, and then press [ENTER].
c) Enter the desired character in the inserted space.
7. If you want to cancel the editing operation and return to the original parameter
value, on the virtual keyboard, highlight CANCEL, and then press [ENTER].
8. To complete the editing of the parameter value, on the virtual keyboard, highlight
DONE, and then press [ENTER].
When editing a multiple line parameter value, highlighting DONE and pressing
[ENTER] moves the cursor to the next line. You can also highlight NEXT and press
[ENTER] to jump to the next field, or highlight PREVIOUS and press [ENTER] to
jump to the previous field.
To Next Page
Loading...
