© 2011 Omnicell, Inc. 1-, 2-, 3-Cell Color Touch Installation and Service Guide/67-2014 Rev G
E-Box Service Guide 14-21
Remove/Replace the Power Entry Module
3. Replace the two nuts that secure the power entry module wires to the E-Box frame.
Figure 14-31. Replace the screws that secure the ground wires to the E-Box
4. Replace the power supply. Follow the steps in “Replace the Power Supply” on page 1-13.
5. Replace the battery. Follow the steps in “Replace the Battery” on page 1-9.
To Next Page
Loading...