OmniCell 2-Cell CTPC - Remove;Replace the Battery

14-10 E-Box Service Guide
Remove/Replace the Battery
1-, 2-, 3-Cell Color Touch Installation and Service Guide/67-2014 Rev G © 2011 Omnicell, Inc.
Remove/Replace the Ba tter y
1. Remove the velcro straps that secure the battery to the E-Box frame.
Figure 14-13. Remove the velcro straps that secure the battery to the E-Box frame
2. Disconnect the cable that connects the battery to the PowerCom4 board.
Figure 14-14. Disconnect the cable that connects the battery to the PowerCom4 board
3. Remove the battery from the E-Box.