© 2011 Omnicell, Inc. 1-, 2-, 3-Cell Color Touch Installation and Service Guide/67-2014 Rev G
Drawers 7-1
Introduction
Drawers
Introduction
There are a variety of drawers available for the 1-, 2-, and 3-cell cabinets. Each drawer type offers a
different level of control for storing and tracking medications and pharmacy supplies.
The supply drawer is the lowest security drawer available. It is typically used to store items that are
frequently used and require little security. The drawer is custom configured using individual
dividers and has a 24-line maximum capacity.
The Omnicell Matrix Drawer (OMD) models are matrix drawers without lids that are configured
by using individual dividers. Drawer liners are used to configure matrix drawers to the required
number of bins. The matrix drawers can be lit with guiding light technology (OLMD) or can come
unlit (OMD).
The lit matrix drawers are configurable up to a maximum of 24 bins and the unlit matrix drawer is
configurable up to a maximum of 96 bins. The drawers are separated into four equal quadrants. In
the unlit drawers, each quadrant can contain a maximum of 24 bins. In the lit matrix drawer, each
quadrant can contain a maximum of six bins.
The Omnicell Sensing Lid (OSL) models have sensing lids. As each lid is lifted, the system senses
and records access to the bin. This guarantees security to those drawers that contain controlled
substances.
The Omnicell Locking Lid (OLL) models are the highest security drawer available. When these
high security drawers are opened, the user can only access the one bin containing the pre-selected
medication. No other bin is unlocked when the user is working in the desired bin. Special censors
provide audible and visual feedback if users attempt unauthorized entry into bins that are not pre-
selected.
Tools List
The following tools may be required to install a drawer:
Torx T10 screwdriver
Torx T15 screwdriver
Rivet Installer
To Next Page
Loading...