11-8 Suture Rack
Removal Procedure
1-, 2-, 3-Cell Color Touch Installation and Service Guide/67-2014 Rev G © 2011 Omnicell, Inc.
SPC Board and Cable
1. Pull the right-most rack forward and disconnect the SPC cable.
Figure 11-1. Remove the SPC Board Cable
2. Remove the two screws securing the rack to the housing using a 3/32” Allen wrench or a T15
Tor x scre wdriver.
Figure 11-2. Remove the screws securing the suture rack to the housing.
3. Remove the suture rack from the housing.
To Next Page
Loading...