Omron NX Series User Manual

Select the Hold or Clear Option.
Precautions for Correct Use
Connections are cut off if any of the following errors occurs in the CPU Unit that is the originator
while tag data links are active.
• Major fault level Controller error
•
Partial fault level Controller error
7 After you register all of the required tags, click the OK Button in the Edit T
ags Dialog Box.
Precautions for Correct Use
Make the following settings to refresh all of the tag data in one tag set at the same time.
• Use the Sysmac Studio, in advance, to specify the same refreshing task for all of the varia-
bles that are assigned to tags in the tag set.
•
Do not place tag variables that have AT specifications in I/O memory and tag variables that
do not have AT specifications in the same tag set.
9 Tag Data Link Functions
9-24
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model