Omron NX Series User Manual

A confirmation message is displayed.
If the No Button is clicked, only the selected tag set is deleted. Click the No Button.
3 To edit a registered tag set and add tags, either double-click the tag set, or select the tag set
and click the Edit Button.
The Edit Tag Set Dialog Box is displayed.
The Tag List on the left side of the dialog box shows tags that are already registered, and the
Candidate Tag List on the right side of the dialog box shows the other tags that are not regis-
tered yet.
9 Tag Data Link Functions
9-26
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model