Omron NX Series User Manual

Name Standard [(identifier) attribute]
Sup-
port
Implementation
specifications
snmpInBadCommunity-
Names
[(4) RO]
The total number of messages received from
an unregistered community.
Sup-
ported
According to the
standard.
snmpInBadCommuni-
tyUses
[(5) RO]
The total number of messages received that
specify an operation that is not allowed by that
community.
Sup-
ported
According to the
standard.
snmpInASNParseErrs
[(6) RO]
The total number of messages received that re-
sulted in an ASN.1 error or BER error during
decoding.
Sup-
ported
According to the
standard.
snmpInTooBigs [(8) RO]
The total number of PDUs received with an er-
ror status of tooBig.
Sup-
ported
According to the
standard.
snmpInNoSuchNames [(9) RO]
The total number of PDUs received with an er-
ror status of noSuchName.
Sup-
ported
According to the
standard.
snmpInBadValues [(10) RO]
The total number of PDUs received with an er-
ror status of badV
alue.
Sup-
ported
According to the
standard.
snmpInReadOnlys
[(11) RO]
The total number of PDUs received with an er-
ror status of readOnly.
Sup-
ported
According to the
standard.
snmpInGenErrs
[(12) RO]
The total number of PDUs received with an er-
ror status of genErr.
Sup-
ported
According to the
standard.
snmpInT
otalReqVars [(13) RO]
The total number of MIB objects read normally
after receiving GetRequest or GetNextRequest.
Sup-
ported
According to the
standard.
snmpInTotalSetVars [(14) RO]
The total number of MIB objects updated nor-
mally after receiving SetRequest.
Sup-
ported
According to the
standard.
snmpInGetRequests [(15) RO]
The total number of GetRequest PDUs re-
ceived.
Sup-
ported
According to the
standard.
snmpInGetNexts [(16) RO]
The total number of GetNextRequest PDUs re-
ceived.
Sup-
ported
According to the
standard.
snmpInSetRequests [(17) RO]
The total number of SetRequest PDUs re-
ceived.
Sup-
ported
According to the
standard.
snmpInGetResponses [(18) RO]
The total number of GetResponse PDUs re-
ceived.
Sup-
ported
According to the
standard.
snmpInTraps [(19) RO]
The total number of trap PDUs received.
Sup-
ported
According to the
standard.
snmpOutTooBigs [(20) RO]
The total number of PDUs sent with an error
status of tooBig.
Sup-
ported
According to the
standard.
11 SNMP Agent
11-18
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English