Omron NX Series - Page 290

Name Standard [(identifier) attribute]
Sup-
port
Implementation
specifications
lldpTxDelay [(4) RW]
The interval between successive
LLDP frame transmissions.
Default value: 2 (seconds)
Sup-
ported
Always 2.
lldpNotificationInterval [(5) RW]
Indicates the transmission interval at
which SNMP notifications are sent
due to information updates from the
remote system. Only one SNMP noti-
fication is sent even if multiple remote
system information updates occur
within the transmission interval.
Default value: 30 (seconds)
Sup-
ported
Always 0.
lldpStatistics [(2) NA]
The MIB for LLDP statistics informa-
tion.
--- ---
lldpStatsRemTablesLastChange-
T
ime
[(1) RO]
Last time when the addition/change/
deletion of neighbor information oc-
curred.
Sup-
ported
According to the
standard.
lldpStatsRemTablesInserts [(2) RO]
Counts up when neighbor information
increased.
Sup-
ported
According to the
standard.
lldpStatsRemTablesDeletes [(3) RO]
Counts up when neighbor information
is deleted.
Sup-
ported
According to the
standard.
lldpStatsRemTablesDrops [(4) RO]
Counts up when neighbor information
cannot be added due to lack of re-
sources.
Sup-
ported
According to the
standard.
lldpStatsRemTablesAgeouts [(5) RO]
Counts up when the retention time
expired and the neighbor information
became invalid.
Sup-
ported
According to the
standard.
lldpStatsTxPortTable [(6) NA]
The table containing transmission
frame statistics information for indi-
vidual LLDP transmission ports.
--- ---
lldpStatsTxPortEntry [(1) NA]
The table entry of transmission frame
statistics information for individual
LLDP transmission ports.
--- ---
lldpStatsTxPort-
FramesT
otal
[(2) RO]
The number of LLDP frame transmis-
sions on the LLDP transmission port.
Sup-
ported
According to the
standard.
lldpStatsRxPortT
able [(7) NA]
The table containing reception frame
statistics information for individual
LLDP reception ports.
--- ---
11 SNMP Agent
11-20
NX-series EtherNet/IP Unit User's Manual (W627)