Since the Register Device List shows a list of devices connected with 192.168.250.1, double-click a
device, 192.168.250.10, in the list.
Input 10 ms as the new RPI value in the Edit Connection Dialog Box, and click the OK Button. The
usage rate of allowable tag data link bandwidth for the device 192.168.250.1 increases to 50.17% as
shown in the Usage of Capacity column, and this indicates that the RPI for the specific connection is
set shorter
.
12 Communications Performance and Communications Load
12-21
NX-series EtherNet/IP Unit User's Manual (W627)
12-2 Adjusting the Communications Load
12
12-2-5 RPI Setting Examples
To Next Page
Loading...
