Omron NX Series User Manual

l
CIP Safety on EtherNet/IP Compatible
Combined with the NX-SL5£££ Safety Control Unit, you can build a system which uses CIP
Safety on EtherNet/IP communications in networks between Controllers and field networks. Safety
communications by CIP Safety is enabled with devices that support CIP Safety on EtherNet/IP and
other Safety CPU Units.
Precautions for Correct Use
• An NX-series EtherNet/IP Unit is required to perform CIP Safety communications. The built-in
EtherNet/IP port on an NX502 CPU Unit does not support the CIP Safety communications.
• CIP Safety communications and tag data links cannot be used together in one NX-series
EtherNet/IP Unit.
•
The I/O refresh time varies depending on the number of connections for CIP Safety commu-
nications. Check the effect of the number of connections for CIP Safety communications on
the task execution time.
l
LLDP
The LLDP (Link Layer Discovery Protocol) enables to exchange information with other network de-
vices that are connected to a physically communicable range.
1 Features and System Configuration
1-5
NX-series EtherNet/IP Unit User's Manual (W627)
1-1 Features
1
1-1-2 Features of NX-series EtherNet/IP Units

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model