Omron NX Series User Manual

l
Status 2 Tab Page
This tab page displays information on nodes with tag data link originator settings. This information
is in blue if the connection is normal, or red if an error occurred.
Additional Information
The target Controller status can be used when the Controller status is set to Included for all the
target sets for both originator and target connections.
If it is set to Not included, it is grayed out on the display.
14 Troubleshooting
14-50
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model