Omron NX Series User Manual

Data Transmission Screen Problem
Synchronization Window The Sysmac Studio displays the following error message and the data will
not be transferred.
Transfer to Controller
Dia-
log Box
The Sysmac Studio displays the following error dialog box and the data will
not be transferred.
EtherNet/IP Connection Set-
ting Tab Page
The
Transfer to Controller and Transfer from Controller Buttons are
grayed out and the data cannot be transferred/compared.
• Monitoring cannot be performed
Monitor results in the EtherNet/IP Connection Monitor Tab Page remain as
"---".
Appendices
A-38
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English