Oracle X4 series User Manual

Set Power Supply Light Load Efficiency Policies on CMM
c.
Click Save to apply your changes.
■ From the CLI, type:
set /CMM/powermgmt redundancy=[ redundancy|none ]
See Also
Set CMM Power Supply Redundancy Policy, Oracle ILOM Configuration and Maintenance
Guide for firmware version 3.1 or 3.2.
Set Power Supply Light Load Efficiency Policies
on CMM
To increase the efficiency of the power supplies, you can monitor how much power the power
supplies are using and shut down one side of a power supply unit.
Before You Begin
■
Log in to Oracle Integrated Lights Out Manager (ILOM). For instructions on how to log in
to Oracle ILOM, see “Launch and Log In to Oracle ILOM” on page 39.
■
The default settings for the Light Load Efficiency Policies in Oracle ILOM include the
following:
■
The Light Load Efficiency Mode is Disabled by default.
■
The Monitor Power Supply 0 Side 0 or Monitor Power Supply 0 Side 1 properties are
Enabled by default.
■
The Monitor Power Supply 1 Side 0 or Monitor Power Supply 1 Side 1 properties are
Enabled by default.
■
Ensure that you have Admin (a) role privileges in Oracle ILOM.
This procedure provides both web and command-line interface (CLI) instructions for the chassis
monitoring module (CMM).
To define light load efficiency policies for power supplies installed in an Oracle
blade chassis system:
Setting System and Management Power Policies (Oracle ILOM) 109

Oracle X4 series Specifications

General

Brand	Oracle
Model	X4 series
Category	Server
Language	English