Do you have a question about the Oracle X4 series and is the answer not in the manual?
Explains the components of the Sun Server X4 series platform name and its identification.
Provides links to Oracle documentation and feedback channels.
Lists and describes single system management tools for Oracle servers.
Identifies tools for managing multiple Oracle servers simultaneously.
Provides a table of common administration functions and links to related tasks.
Describes Oracle System Assistant, a startup and maintenance tool on a USB drive.
Introduces Oracle Hardware Management Pack, a set of command-line interface tools.
Provides instructions for accessing Oracle System Assistant via startup or ILOM.
Explains how to access Oracle ILOM for system configuration and monitoring.
Details on how to access Oracle Hardware Management Pack tools.
Instructions on how to access the BIOS Setup Utility for system configuration.
Describes the three power states: Powered off, Standby power, and Full power.
Procedure to change the order of devices in the server's boot order list.
Instructions to set the next boot device using Oracle ILOM.
Describes tools for configuring RAID arrays on server storage drives.
Configures iSCSI virtual drives in Legacy BIOS Boot Mode using BIOS Setup Utility.
Configures iSCSI virtual drives in UEFI Boot Mode using BIOS Setup Utility.
Details on assigning hostname, system identifier, contact, and location.
Configures network settings for Oracle ILOM, including IPv4 and IPv6.
Procedures for creating and managing Oracle ILOM user accounts.
Sets SP clock properties using Oracle System Assistant.
Configures Oracle ILOM clock by NTP sync or local time.
Instructions to download HMP via Oracle System Assistant.
Adjusts system-wide power management settings in Oracle ILOM.
Modifies cooling down policies for the server SP.
Actions needed to prepare the server before OS installation.
View system information and inventory using Oracle ILOM or System Assistant.
Discover and resolve problems using the ILOM Open Problems table.
Run Oracle diagnostic tests to verify server installations and troubleshoot.
Backup, restore, or replicate BIOS firmware configuration using Oracle ILOM.
Instructions for launching and accessing Oracle System Assistant.
Describes the layout of the Oracle System Assistant user interface.
Steps to prepare the system for Oracle System Assistant updates.
Procedure to disable Oracle System Assistant, making it unbootable.
Describes known issues with Oracle System Assistant.
Procedure to verify Oracle System Assistant installation and state.
Describes how to access and use the BIOS Setup Utility.
Explains the advantages and considerations of Legacy and UEFI boot modes.
Details the top-level menu tabs within the BIOS Setup Utility.
Helps determine if option ROM or I/O space allocation is needed for devices.
Explains how elastic computing maximizes server performance.
Procedure to activate/deactivate cores using Oracle Solaris OS.
Procedure to activate/deactivate cores using Oracle Linux OS.
Procedure to activate/deactivate cores using BIOS Setup Utility.
Details the relationship between active cores and maximum CPU frequency.
Provides an overview of available updates and the tools used for them.
Explains the different types of software downloads available.
Instructions to update system BIOS, SP, or CMM firmware using ILOM.
Guides on downloading firmware and software from My Oracle Support (MOS).