Update Software and Firmware (Oracle System Assistant)
Note - To automatically check for updates each time the system is started, click the check box.
3.
To check for a new software release, click the Check for Updates button.
If an update is available, the update's readme file appears.
4.
To get the update, click the Download and Apply Updates button.
The Get Updates Sign-In screen appears.
5.
Provide your My Oracle Support (MOS) credentials.
Enter your MOS user name and password.
Note - If the sign-in process stops, it might be because your user name and password do not
match, or because My Oracle Support is not configured to enable your server to get updates.
To configure My Oracle Support to enable your server to get updates, see “Configure MOS to
Enable Oracle System Assistant Updates” on page 168.
The server downloads the updates and then displays a message asking to reboot the server.
6.
Select OK.
The server reboots and restarts Oracle System Assistant.
To install the updated firmware, sofrware, and drivers, see “Update Software and Firmware
(Oracle System Assistant)” on page 226.
See Also
■
“Using the Oracle System Assistant User Interface” on page 152
Update Software and Firmware (Oracle System
Assistant)
Use this procedure to update server firmware using Oracle System Assistant.
The Update Firmware task allows you to update system firmware (BIOS and Oracle ILOM SP)
and hardware device firmware in the system to the latest versions. It allows you to preview the
226 Oracle X4 Series Servers Administration Guide • April 2016
To Next Page
Loading...
Need help?
General
