Access the BIOS Setup Utility Menus
■
“Set UEFI Late Synchronization” on page 195
The following table describes the top-level BIOS Setup Utility menu tabs.
Menu Description
Main Includes general product information, including memory, time and date,
security settings, system serial number, and CPU and DIMM information.
Advanced Provides configuration settings for the CPU, including trusted computing,
USB, and others.
IO Enable and disable Option ROMs.
Boot Enable or disable internal Oracle System Assistant support, set the boot mode
to Legacy or UEFI, and configure the boot device priority.
UEFI Driver Control Appears only if the boot mode is set to UEFI Boot Mode. Only UEFI boot
options are present to the user.
Save and Exit Save changes and exit, discard changes and exit, discard changes, or load
optimal or fail-safe defaults.
Related Information
■
“Access the BIOS Setup Utility Menus” on page 190
■
“Navigate the BIOS Setup Utility Menus” on page 193
Access the BIOS Setup Utility Menus
Before You Begin
Select one of the following access interfaces:
■
Use a USB keyboard and VGA monitor connected directly to the server. (A mouse is not
required to operate the BIOS Setup Utility.)
■
Use a terminal or terminal emulator connected to a computer through the serial port on the
back panel of the server.
■
Connect to the server using the Oracle ILOM Remote Console application.
For details, see “Launch a Remote System Console Redirection Session” on page 43.
The following picture shows the connection interfaces in a blade system.
190 Oracle X4 Series Servers Administration Guide • April 2016
To Next Page
Loading...
Need help?
General
