Name: Oracle X4 series
Brand: Oracle
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Configure Option ROM and I/O Space Allocation

Warning: Out of option ROM space for <device path | address>

■

For I/O space, the messages look like this:

Warning: Not enough IO address space allocated for device path | address

Warning: Not enough IO address space allocated for device device path | address

Each slot can generate several messages. This is normal.

It is possible that the device you added has been assigned option ROM and/or I/O space at the

expense of some other device. If this is the case, the device you added does not appear in the

list, but the original device does. This depends on the position of each device in the probe order.

Decide whether you need to configure option ROM or I/O space allocation for

one of the following reasons.

■

Error messages inform you that a device that you wish boot from has not been allocated

option ROM and/or I/O space.

■

You wish to be able to run a utility such as a RAID configuration utility on a device that has

not been allocated option ROM.

■

(Optional) You wish to make the error messages go away.

Note - There is no need to configure option ROM or I/O space allocation simply because of

these messages, unless you require the functionality provided by the option ROM and the I/

O space.

Oracle X4 series User Manual

Questions and Answers: