Oracle X4 series User Manual

Mount Oracle System Assistant Flash Drive on Solaris 10 Host
5.
To exit the shell, type exit.
See Also
■
“Accessing Oracle System Assistant” on page 147
■
“Mount Oracle System Assistant Flash Drive on Solaris 10 Host” on page 161
■
“Mount Oracle System Assistant Flash Drive on Oracle VM Host” on page 162
■
“Mount Oracle System Assistant Flash Drive on a Linux Host” on page 163
Mount Oracle System Assistant Flash Drive on
Solaris 10 Host
If the server is running the Oracle Solaris operating system, you must mount the Oracle System
Assistant USB flash drive before you use the file system to display or access its contents.
1.
To turn off the volfs service, type:
# svcadm disable volfs
2.
To identify the USB flash drive, type:
# rmformat -l
The system displays a list of devices:
Looking for devices...
1. Logical Node: /dev/rdsk/c1t0d0p0
Physical Node:
/pci@0,0/pci108e,484e@1a/hub@1/storage@2/disk@0,0
Connected Device: ORACLE SSM PMAP
Device Type: Removable
#
3.
To manually mount the USB flash drive in read-only mode, type:
# mount -F pcfs -o ro /dev/dsk/c1t0d0p1 /mnt
4.
To retrieve the Oracle Solaris content, type:
# cd /mnt/Solaris
# ls
The system displays:
10U10 11
#
Using Oracle System Assistant 161

Oracle X4 series Specifications

General

Brand	Oracle
Model	X4 series
Category	Server
Language	English