Set Next Boot Device (Oracle ILOM)
Set Next Boot Device (Oracle ILOM)
You can use Oracle Integrated Lights Out Manager (ILOM) to set the next boot device on
your server. Setting the next boot device in Oracle ILOM causes your server to boot from the
selected device on the next power reset. For subsequent power resets, the server automatically
reverts to booting from the boot order list.
The following procedure provides both web and command-line interface (CLI) instructions for
the server service processor (SP).
Before You Begin
■
Log in to Oracle ILOM. For instructions for accessing and logging in to Oracle ILOM, see
“Launch and Log In to Oracle ILOM” on page 39.
■
Ensure that you have Reset and Host Control (r) role privileges in Oracle ILOM.
To set a boot device for the next power reset:
■ From the Web interface:
a.
Click Host Management > Host Console, and then select a boot device.
b.
Click Save.
c.
Click Host Management > Power Control, and then select Power-Cycle.
d.
Click Save.
■ From the CLI:
a.
Type:
set /HOST/boot_device=boot_device
Where boot_device is one of the following: disk, floppy, bios, cdrom, pxe,
diagnostics, or default
b.
Type:
reset /System
Modifying Boot Order 57
To Next Page
Loading...
Need help?
General
