Oracle X4 series User Manual

Restore the Backed Up BIOS Configuration or Reset BIOS to Factory Defaults (Oracle ILOM)
Restore the Backed Up BIOS Configuration or
Reset BIOS to Factory Defaults (Oracle ILOM)
When changes to the host BIOS firmware configuration no longer work, use Oracle Integrated
Lights Out Manager (ILOM) to either:
■
Restore the host BIOS configuration with the settings from a backed up BIOS configuration.
or
■
Restore the host BIOS configuration with the default BIOS settings shipped from the
factory.
Before You Begin
■
Log in to Oracle ILOM. For instructions see “Launch and Log In to Oracle
ILOM” on page 39.
■
Ensure that you have Reset and Host Control (r) and Admin (a) role privileges in Oracle
ILOM.
This procedure provides web and command-line interface (CLI) instructions for a server service
processor (SP).
To restore the BIOS configuration with settings from a backup configuration file
or with factory default settings, do one of the following:
■ From the Web interface:
a.
Click System Management > BIOS.
b.
Perform one of the steps below:
■
To reset the BIOS configuration settings to the settings shipped from the factory,
select Factory in the Reset to Defaults drop-down list, and then click Save.
■
To restore the backed up BIOS configuration, do the following in the Restore
Panel:
i) Select a Restore Option.
ii) Select a Transfer Method.
Backing Up and Restoring Firmware Configurations and BIOS Settings 133

Oracle X4 series Specifications

General

Brand	Oracle
Model	X4 series
Category	Server
Language	English