Oracle X4 series User Manual

Monitor Open Problems (Oracle Hardware Management Pack)
recoverable events, and upper and lower critical events. For details about viewing the event log,
follow these instructions.
Before You Begin
■
Log in to Oracle ILOM. For instructions see “Launch and Log In to Oracle
ILOM” on page 39.
This procedure provides web and command-line interface (CLI) instructions for both a server
service processor (SP) and a chassis monitoring module (CMM).
To view event log entries:
■ To use the web interface click ILOM Administration > Logs > Event.
■ To use the CLI, type:
show /[SP|CMM]/Logs/event/lists
See Also
■
Managing Oracle ILOM Log Entries, Oracle Integrated Lights Out Manager (ILOM) 3.1
User's Guide for firmware release 3.1 or 3.2
■
Setting Up Alert Notifications, Oracle ILOM Configuration and Maintenance Guide for
firmware version 3.1 or 3.2
Monitor Open Problems (Oracle Hardware
Management Pack)
Use the Oracle Hardware Management Pack hwmgtcli command to monitor open
problems.
Refer to the hwmgmtcli command in the Hardware Management Agents documentation and in
the Oracle Hardware Management Pack Documentation Library at:
http://www.oracle.com/goto/ohmp/docs
126 Oracle X4 Series Servers Administration Guide • April 2016

Oracle X4 series Specifications

General

Brand	Oracle
Model	X4 series
Category	Server
Language	English