Oracle X4 series User Manual

Using Oracle System Assistant
This section provides basic use instructions for Oracle System Assistant. It describes how to
start and use Oracle System Assistant and how to access the content on the Oracle System
Assistant flash drive. It includes:
■
“Accessing Oracle System Assistant” on page 147
■
“Using the Oracle System Assistant User Interface” on page 152
■
“View Help and the Readme File” on page 155
■
“View Platform Documentation” on page 156
■
“Browse Oracle System Assistant Content” on page 159
■
“Accessing Files on the Oracle System Assistant Flash Drive” on page 157
■
“Importing and Exporting Hardware Configuration (Oracle System Assistant
1.2)” on page 142
Note - For information about potential problems and workarounds for Oracle System Assistant,
see “Oracle System Assistant Known Issues” on page 178 and your platform product notes.
Accessing Oracle System Assistant
Use Oracle System Assistant to prepare a new system for operation and to perform maintenance
tasks such as upgrading software and firmware.
You must reboot the system to Oracle System Assistant to use it.
To launch Oracle System Assistant, use one of the following methods:
Access Method Link
Access Oracle System Assistant during startup. “Launch Oracle System Assistant at Startup” on page 34
Access Oracle System Assistant using Oracle ILOM. “Launch Oracle System Assistant (Oracle
ILOM)” on page 35
Using Oracle System Assistant 147

Oracle X4 series Specifications

General

Brand	Oracle
Model	X4 series
Category	Server
Language	English