Access the BIOS Setup Utility Menus
1.
Reset or power on the server using one of the following methods:
■ From the local server: Press the Power button on the front panel of the
server to power off the server, and then press the Power button again to
power on the server.
■ From the Oracle ILOM web interface: Click Host Management > Power
Control, and select Reset from the Select Action drop-down list.
■
From the Oracle ILOM CLI on the server SP: Type reset /System.
The POST sequence begins.
Refer to your server service manual for more details.
2.
To enter the BIOS Setup Utility, press the F2 key (Ctrl+E from a serial connection)
when prompted.
Setting Up and Configuring BIOS 191
To Next Page
Loading...
Need help?
General
