Oracle X4 series User Manual

Launch and Log In to Oracle ILOM
If you are setting up Oracle ILOM on your server for the first time, use the default
administrative root account to log in. Otherwise, all users should log in to Oracle ILOM with
their assigned user account name and password.
Note - To enable first-time login and access to Oracle ILOM, a default Administrator account
and its password are provided with the system. To build a secure environment and enforce
user authentication and authorization in Oracle ILOM, you must change the default password
(changeme) for the default Administrator account (root) after your initial login to Oracle ILOM.
If this default Administrator account has since been changed, contact your system administrator
for an Oracle ILOM user account with Administrator privileges.
1.
Ensure that a physical management connection to Oracle ILOM has been
established.
For instructions for establishing a physical management connection to Oracle ILOM see
“Establish a First-Time Management Connection to Oracle ILOM” on page 38.
2.
To launch and log in to Oracle ILOM, perform one of the following procedures
based on the physical management connection established to Oracle ILOM.
Management
Connection
Oracle
ILOM
Interface
Instructions
Remote
Management
Connection
Web 1. Navigate to http:// ILOM_SP_or CMM_ ipaddress
The Oracle ILOM log in page appears.
2. Type your user name and password, and then click Log In.
Note - If this is the first time you are accessing Oracle ILOM, type root for the
user name and changeme for the password.
Note - To enable first-time login and access to Oracle ILOM, a default
Administrator account and its password are provided with the system. To build
a secure environment and enforce user authentication and authorization in
Oracle ILOM, you must change the default password (changeme) for the default
Administrator account (root) after your initial login to Oracle ILOM. If this
default Administrator account has since been changed, contact your system
administrator for an Oracle ILOM user account with Administrator privileges.
Note - To prevent unauthorized access to Oracle ILOM, create user
accounts for each user. For details, see “Adding Oracle ILOM User
Accounts” on page 93.
Remote
Management
Connection
CLI 1. Open a terminal.
2. Type:
ssh username@ILOM_SP_or_CMM_ipaddress
3. Press Return and type your password when prompted.
40 Oracle X4 Series Servers Administration Guide • April 2016

Oracle X4 series Specifications

General

Brand	Oracle
Model	X4 series
Category	Server
Language	English