117
DP-C405/C305/C265
FEB 2008Ver. 1.1
<Cleaning the OHP Detection Reflector>
Clean the OHP Detection Reflector with a soft
cloth, saturated with isopropyl alcohol.
Note:
When reinstalling the Lower Right Side Cover Unit,
pull the lock lever to the locked position in the
direction illustrated by the arrow.
(10) Remove 3 Screws (X5).
(11) Remove 2 Screws (Y24).
(12) Remove the Gear Assembly.
Note:
When reinstalling the Gear Assembly, make sure
that the convex part of the gear bracket, and
clutch are properly positioned as illustrated.