159
DP-C405/C305/C265
FEB 2008Ver. 1.1
(20) Disconnect the Harness.
(21) Remove 1 Screw (Y19).
(22) Remove the 2nd Paper Feed Module.
Note:
Follow the instructions of steps (8) - (17) for the
1st Paper Feed Module.
<Cleaning the Intermediate Roller>
(23) Remove the Sheet Bypass Tray.
(See sect. 2.2.9.)
(24) Remove the Lower Right Side Cover Unit.
(See sect. 2.2.8.)
(25) Clean the Upper Intermediate Roller with a soft
cloth, saturated with water.
(26) Open the Jam Cover.
(27) Clean the Lower Intermediate Roller with a soft
cloth, saturated with water.