Panasonic DP-C305 - Removing the Paddle Assembly

820
DP-C405/C305/C265
FEB 2008Ver. 1.1
Fig. 3-040
2-6. Removing the Paddle Assembly
(1) Remove the Processing Tray Assembly.
(See Adjusting the Phase of the Gear in the
Saddle Unit)
(2) Place the Processing Tray Assembly [1] as
shown.
Caution:
Be sure to take care not to damage the Aligning
Plate [2].
Fig. 3-041
(3) Detach the Timing Belt [3], and remove 2
Screws [4].
Fig. 3-042
(4) Separate the Processing Tray Assembly [5]
and the Paddle Assembly [6] as shown.
[1]
[2]
[4]
[4]
[3]
[6]
[5]