Panasonic DP-C305 - Installing the Exit Tray (Outer) (DA-XT320)

680
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.8. Installing the Exit Tray (Outer) (DA-XT320)
9.8.1. Contents
Note:
1. Before installing this option, make sure the Paper Transport Unit (DA-FK350/FK320) is installed to
machine first. Refer to the Installation Instructions of the Paper Transport Unit (DA-FK350/FK320).
2. Refer to the Parts Manual for Part Number(s), Packing, and Accessories detail.
9.8.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
No. Qty. Description Remarks
11Exit Tray
2 1 Outer Cover Assembly
3 5 Screw (M3 x 6)
4 1 Installation Instructions This document
(1) Insert 2 Screws (M3 x 6) first, and tighten them
1/2 way.
(2) Install the Outer Cover Assembly.
(3) Secure the Outer Cover Assembly with
3 Screws (M3 x 6).
(4) Tighten 2 Screws (M3 x 6) installed in Step (1).
3 41 2