Panasonic DP-C305 - Commands that Can be Used; Internet Parameters that Can be Entered and Retrieved

739
DP-C405/C305/C265
FEB 2008Ver. 1.1
10.1.2. Commands That Can Be Used
The "Subject" field of an email message can be used as a command line field.
The following commands can be used with this machine:
10.1.3. Internet Parameters That Can Be Entered and Retrieved
1. FROM selection (user name: up to 20 characters)
2. Default domain
3. Selected domain (up to 10 domains)
4. Relay domain (up to 10 domains can be programmed for relayed transmission)
5. Administrator email address
6. Relay password
7. Domain name (name of a relay domain, up to 30 characters)
8. Community name
9. Device name
10. Device location
Note:
1. All other parameters need to be programmed as local station information in the Function Settings.
2. The remote password that has been defined as an Internet parameter (local station information) for this
set: Entry
get: Retrieval
parameters:
Internet parameters
addr: Address book
jnl: Transaction journal
password: Remote password predefined as an entry item of local station
information about this machine.
(Example: 123456789)
Enter the password enclosed with parentheses “().”
Enter the command in single-byte characters, enclosed with # the sharp sign (#).
Enter a command here
Comma nd entered in the "Subje ct" field Explanatio n
1 #set parameters (password)# Enter Internet parameters
2 #get parameters (password)# Retrieve Internet parameters
3 #set abbr (password)# Program an address book
4 #get abbr (password)# Retrieve the address book
5 #get jnl (password)# Retrieve the current transaction journal