Panasonic DP-C305 - Installing the SD Memory Card (64 MB up to 4 GB)

668
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.5. Installing the SD Memory Card (64 MB up to 4 GB)
9.5.1. Contents
Note:
1. The Panasonic SD Memory Cards listed above are included for your reference only.
2. The suffix (****) may differ depending on the Destination.
9.5.2. Installation
1. Ensure that the Write Protect Switch of the SD Memory Card is in the “Unlock” position.
2. Ensure that there is no Fax Jobs in memory. If there is a Fax Job in memory, clear all Jobs first by
following the steps below.
1) Press the “Function”, “Copy”, and the “3” keys simultaneously on the Control Panel.
2) Input the password, and select the “OK” button to enter the Service Mode (default password is
00000000).
3) Press the “9” key on the Control Panel, and then press the “Start” key to enter the F9 Service
Mode (Unit Maintenance).
4) Select “00 Fax Service Mode” on the Touch Panel display.
5) Scroll the menu with the “” button on the Touch Panel display, and select “06 RAM Initialize”.
6) Select “09 All Job Clear” on the Touch Panel display, and then select the “Yes” button.
After clearing the jobs, the machine reboots automatically and returns to the standby mode.
3. Install the SD Memory Card by following the steps below.
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Qty. Description Remarks
1 SD Memory Card (RP-SDxxx****) 64 MB - 4GB
(1) Loosen 11 Screws.
(2) Remove the Rear Cover.